/********** Copyright 1990 Regents of the University of California. All rights reserved. Author: 1988 Min-Chie Jeng, Hong J. Park, Thomas L. Quarles **********/ #include "ngspice/ngspice.h" #include "ngspice/devdefs.h" #include "bsim2def.h" #include "ngspice/suffix.h" IFparm B2pTable[] = { /* parameters */ IOP( "l", BSIM2_L, IF_REAL , "Length"), IOP( "w", BSIM2_W, IF_REAL , "Width"), IOP( "m", BSIM2_M, IF_REAL , "Parallel Multiplier"), IOP( "ad", BSIM2_AD, IF_REAL , "Drain area"), IOP( "as", BSIM2_AS, IF_REAL , "Source area"), IOP( "pd", BSIM2_PD, IF_REAL , "Drain perimeter"), IOP( "ps", BSIM2_PS, IF_REAL , "Source perimeter"), IOP( "nrd", BSIM2_NRD, IF_REAL , "Number of squares in drain"), IOP( "nrs", BSIM2_NRS, IF_REAL , "Number of squares in source"), IOP( "off", BSIM2_OFF, IF_FLAG , "Device is initially off"), IOP( "vds", BSIM2_IC_VDS, IF_REAL , "Initial D-S voltage"), IOP( "vgs", BSIM2_IC_VGS, IF_REAL , "Initial G-S voltage"), IOP( "vbs", BSIM2_IC_VBS, IF_REAL , "Initial B-S voltage"), IP( "ic", BSIM2_IC, IF_VECTOR , "Vector of DS,GS,BS initial voltages") }; IFparm B2mPTable[] = { /* model parameters */ IOP( "vfb", BSIM2_MOD_VFB0, IF_REAL,"Flat band voltage"), IOP( "lvfb", BSIM2_MOD_VFBL, IF_REAL, "Length dependence of vfb"), IOP( "wvfb", BSIM2_MOD_VFBW, IF_REAL, "Width dependence of vfb"), IOP( "phi", BSIM2_MOD_PHI0, IF_REAL, "Strong inversion surface potential "), IOP( "lphi", BSIM2_MOD_PHIL, IF_REAL, "Length dependence of phi"), IOP( "wphi", BSIM2_MOD_PHIW, IF_REAL, "Width dependence of phi"), IOP( "k1", BSIM2_MOD_K10, IF_REAL, "Bulk effect coefficient 1"), IOP( "lk1", BSIM2_MOD_K1L, IF_REAL, "Length dependence of k1"), IOP( "wk1", BSIM2_MOD_K1W, IF_REAL, "Width dependence of k1"), IOP( "k2", BSIM2_MOD_K20, IF_REAL, "Bulk effect coefficient 2"), IOP( "lk2", BSIM2_MOD_K2L, IF_REAL, "Length dependence of k2"), IOP( "wk2", BSIM2_MOD_K2W, IF_REAL, "Width dependence of k2"), IOP( "eta0", BSIM2_MOD_ETA00, IF_REAL, "VDS dependence of threshold voltage at VDD=0"), IOP( "leta0", BSIM2_MOD_ETA0L, IF_REAL, "Length dependence of eta0"), IOP( "weta0", BSIM2_MOD_ETA0W, IF_REAL, "Width dependence of eta0"), IOP( "etab", BSIM2_MOD_ETAB0, IF_REAL, "VBS dependence of eta"), IOP( "letab", BSIM2_MOD_ETABL, IF_REAL, "Length dependence of etab"), IOP( "wetab", BSIM2_MOD_ETABW, IF_REAL, "Width dependence of etab"), IOP( "dl", BSIM2_MOD_DELTAL, IF_REAL, "Channel length reduction in um"), IOP( "dw", BSIM2_MOD_DELTAW, IF_REAL, "Channel width reduction in um"), IOP( "mu0", BSIM2_MOD_MOB00, IF_REAL, "Low-field mobility, at VDS=0 VGS=VTH"), IOP( "mu0b", BSIM2_MOD_MOB0B0, IF_REAL, "VBS dependence of low-field mobility"), IOP( "lmu0b", BSIM2_MOD_MOB0BL, IF_REAL, "Length dependence of mu0b"), IOP( "wmu0b", BSIM2_MOD_MOB0BW, IF_REAL, "Width dependence of mu0b"), IOP( "mus0", BSIM2_MOD_MOBS00, IF_REAL, "Mobility at VDS=VDD VGS=VTH"), IOP( "lmus0", BSIM2_MOD_MOBS0L, IF_REAL, "Length dependence of mus0"), IOP( "wmus0", BSIM2_MOD_MOBS0W, IF_REAL, "Width dependence of mus"), IOP( "musb", BSIM2_MOD_MOBSB0, IF_REAL, "VBS dependence of mus"), IOP( "lmusb", BSIM2_MOD_MOBSBL, IF_REAL, "Length dependence of musb"), IOP( "wmusb", BSIM2_MOD_MOBSBW, IF_REAL, "Width dependence of musb"), IOP( "mu20", BSIM2_MOD_MOB200, IF_REAL, "VDS dependence of mu in tanh term"), IOP( "lmu20", BSIM2_MOD_MOB20L, IF_REAL, "Length dependence of mu20"), IOP( "wmu20", BSIM2_MOD_MOB20W, IF_REAL, "Width dependence of mu20"), IOP( "mu2b", BSIM2_MOD_MOB2B0, IF_REAL, "VBS dependence of mu2"), IOP( "lmu2b", BSIM2_MOD_MOB2BL, IF_REAL, "Length dependence of mu2b"), IOP( "wmu2b", BSIM2_MOD_MOB2BW, IF_REAL, "Width dependence of mu2b"), IOP( "mu2g", BSIM2_MOD_MOB2G0, IF_REAL, "VGS dependence of mu2"), IOP( "lmu2g", BSIM2_MOD_MOB2GL, IF_REAL, "Length dependence of mu2g"), IOP( "wmu2g", BSIM2_MOD_MOB2GW, IF_REAL, "Width dependence of mu2g"), IOP( "mu30", BSIM2_MOD_MOB300, IF_REAL, "VDS dependence of mu in linear term"), IOP( "lmu30", BSIM2_MOD_MOB30L, IF_REAL, "Length dependence of mu30"), IOP( "wmu30", BSIM2_MOD_MOB30W, IF_REAL, "Width dependence of mu30"), IOP( "mu3b", BSIM2_MOD_MOB3B0, IF_REAL, "VBS dependence of mu3"), IOP( "lmu3b", BSIM2_MOD_MOB3BL, IF_REAL, "Length dependence of mu3b"), IOP( "wmu3b", BSIM2_MOD_MOB3BW, IF_REAL, "Width dependence of mu3b"), IOP( "mu3g", BSIM2_MOD_MOB3G0, IF_REAL, "VGS dependence of mu3"), IOP( "lmu3g", BSIM2_MOD_MOB3GL, IF_REAL, "Length dependence of mu3g"), IOP( "wmu3g", BSIM2_MOD_MOB3GW, IF_REAL, "Width dependence of mu3g"), IOP( "mu40", BSIM2_MOD_MOB400, IF_REAL, "VDS dependence of mu in linear term"), IOP( "lmu40", BSIM2_MOD_MOB40L, IF_REAL, "Length dependence of mu40"), IOP( "wmu40", BSIM2_MOD_MOB40W, IF_REAL, "Width dependence of mu40"), IOP( "mu4b", BSIM2_MOD_MOB4B0, IF_REAL, "VBS dependence of mu4"), IOP( "lmu4b", BSIM2_MOD_MOB4BL, IF_REAL, "Length dependence of mu4b"), IOP( "wmu4b", BSIM2_MOD_MOB4BW, IF_REAL, "Width dependence of mu4b"), IOP( "mu4g", BSIM2_MOD_MOB4G0, IF_REAL, "VGS dependence of mu4"), IOP( "lmu4g", BSIM2_MOD_MOB4GL, IF_REAL, "Length dependence of mu4g"), IOP( "wmu4g", BSIM2_MOD_MOB4GW, IF_REAL, "Width dependence of mu4g"), IOP( "ua0", BSIM2_MOD_UA00, IF_REAL, "Linear VGS dependence of mobility"), IOP( "lua0", BSIM2_MOD_UA0L, IF_REAL, "Length dependence of ua0"), IOP( "wua0", BSIM2_MOD_UA0W, IF_REAL, "Width dependence of ua0"), IOP( "uab", BSIM2_MOD_UAB0, IF_REAL, "VBS dependence of ua"), IOP( "luab", BSIM2_MOD_UABL, IF_REAL, "Length dependence of uab"), IOP( "wuab", BSIM2_MOD_UABW, IF_REAL, "Width dependence of uab"), IOP( "ub0", BSIM2_MOD_UB00, IF_REAL, "Quadratic VGS dependence of mobility"), IOP( "lub0", BSIM2_MOD_UB0L, IF_REAL, "Length dependence of ub0"), IOP( "wub0", BSIM2_MOD_UB0W, IF_REAL, "Width dependence of ub0"), IOP( "ubb", BSIM2_MOD_UBB0, IF_REAL, "VBS dependence of ub"), IOP( "lubb", BSIM2_MOD_UBBL, IF_REAL, "Length dependence of ubb"), IOP( "wubb", BSIM2_MOD_UBBW, IF_REAL, "Width dependence of ubb"), IOP( "u10", BSIM2_MOD_U100, IF_REAL, "VDS depence of mobility"), IOP( "lu10", BSIM2_MOD_U10L, IF_REAL, "Length dependence of u10"), IOP( "wu10", BSIM2_MOD_U10W, IF_REAL, "Width dependence of u10"), IOP( "u1b", BSIM2_MOD_U1B0, IF_REAL, "VBS depence of u1"), IOP( "lu1b", BSIM2_MOD_U1BL, IF_REAL, "Length depence of u1b"), IOP( "wu1b", BSIM2_MOD_U1BW, IF_REAL, "Width depence of u1b"), IOP( "u1d", BSIM2_MOD_U1D0, IF_REAL, "VDS depence of u1"), IOP( "lu1d", BSIM2_MOD_U1DL, IF_REAL, "Length depence of u1d"), IOP( "wu1d", BSIM2_MOD_U1DW, IF_REAL, "Width depence of u1d"), IOP( "n0", BSIM2_MOD_N00, IF_REAL, "Subthreshold slope at VDS=0 VBS=0"), IOP( "ln0", BSIM2_MOD_N0L, IF_REAL, "Length dependence of n0"), IOP( "wn0", BSIM2_MOD_N0W, IF_REAL, "Width dependence of n0"), IOP( "nb", BSIM2_MOD_NB0, IF_REAL, "VBS dependence of n"), IOP( "lnb", BSIM2_MOD_NBL, IF_REAL, "Length dependence of nb"), IOP( "wnb", BSIM2_MOD_NBW, IF_REAL, "Width dependence of nb"), IOP( "nd", BSIM2_MOD_ND0, IF_REAL, "VDS dependence of n"), IOP( "lnd", BSIM2_MOD_NDL, IF_REAL, "Length dependence of nd"), IOP( "wnd", BSIM2_MOD_NDW, IF_REAL, "Width dependence of nd"), IOP( "vof0", BSIM2_MOD_VOF00, IF_REAL, "Threshold voltage offset AT VDS=0 VBS=0"), IOP( "lvof0", BSIM2_MOD_VOF0L, IF_REAL, "Length dependence of vof0"), IOP( "wvof0", BSIM2_MOD_VOF0W, IF_REAL, "Width dependence of vof0"), IOP( "vofb", BSIM2_MOD_VOFB0, IF_REAL, "VBS dependence of vof"), IOP( "lvofb", BSIM2_MOD_VOFBL, IF_REAL, "Length dependence of vofb"), IOP( "wvofb", BSIM2_MOD_VOFBW, IF_REAL, "Width dependence of vofb"), IOP( "vofd", BSIM2_MOD_VOFD0, IF_REAL, "VDS dependence of vof"), IOP( "lvofd", BSIM2_MOD_VOFDL, IF_REAL, "Length dependence of vofd"), IOP( "wvofd", BSIM2_MOD_VOFDW, IF_REAL, "Width dependence of vofd"), IOP( "ai0", BSIM2_MOD_AI00, IF_REAL, "Pre-factor of hot-electron effect."), IOP( "lai0", BSIM2_MOD_AI0L, IF_REAL, "Length dependence of ai0"), IOP( "wai0", BSIM2_MOD_AI0W, IF_REAL, "Width dependence of ai0"), IOP( "aib", BSIM2_MOD_AIB0, IF_REAL, "VBS dependence of ai"), IOP( "laib", BSIM2_MOD_AIBL, IF_REAL, "Length dependence of aib"), IOP( "waib", BSIM2_MOD_AIBW, IF_REAL, "Width dependence of aib"), IOP( "bi0", BSIM2_MOD_BI00, IF_REAL, "Exponential factor of hot-electron effect."), IOP( "lbi0", BSIM2_MOD_BI0L, IF_REAL, "Length dependence of bi0"), IOP( "wbi0", BSIM2_MOD_BI0W, IF_REAL, "Width dependence of bi0"), IOP( "bib", BSIM2_MOD_BIB0, IF_REAL, "VBS dependence of bi"), IOP( "lbib", BSIM2_MOD_BIBL, IF_REAL, "Length dependence of bib"), IOP( "wbib", BSIM2_MOD_BIBW, IF_REAL, "Width dependence of bib"), IOP( "vghigh", BSIM2_MOD_VGHIGH0, IF_REAL, "Upper bound of the cubic spline function."), IOP( "lvghigh", BSIM2_MOD_VGHIGHL, IF_REAL, "Length dependence of vghigh"), IOP( "wvghigh", BSIM2_MOD_VGHIGHW, IF_REAL, "Width dependence of vghigh"), IOP( "vglow", BSIM2_MOD_VGLOW0, IF_REAL, "Lower bound of the cubic spline function."), IOP( "lvglow", BSIM2_MOD_VGLOWL, IF_REAL, "Length dependence of vglow"), IOP( "wvglow", BSIM2_MOD_VGLOWW, IF_REAL, "Width dependence of vglow"), IOP( "tox", BSIM2_MOD_TOX, IF_REAL, "Gate oxide thickness in um"), IOP( "temp", BSIM2_MOD_TEMP, IF_REAL, "Temperature in degree Celcius"), IOP( "vdd", BSIM2_MOD_VDD, IF_REAL, "Maximum Vds "), IOP( "vgg", BSIM2_MOD_VGG, IF_REAL, "Maximum Vgs "), IOP( "vbb", BSIM2_MOD_VBB, IF_REAL, "Maximum Vbs "), IOPA( "cgso", BSIM2_MOD_CGSO, IF_REAL, "Gate source overlap capacitance per unit channel width(m)"), IOPA( "cgdo", BSIM2_MOD_CGDO, IF_REAL, "Gate drain overlap capacitance per unit channel width(m)"), IOPA( "cgbo", BSIM2_MOD_CGBO, IF_REAL, "Gate bulk overlap capacitance per unit channel length(m)"), IOP( "xpart", BSIM2_MOD_XPART, IF_REAL, "Flag for channel charge partitioning"), IOP( "rsh", BSIM2_MOD_RSH, IF_REAL, "Source drain diffusion sheet resistance in ohm per square"), IOP( "js", BSIM2_MOD_JS, IF_REAL, "Source drain junction saturation current per unit area"), IOP( "pb", BSIM2_MOD_PB, IF_REAL, "Source drain junction built in potential"), IOPA( "mj", BSIM2_MOD_MJ, IF_REAL, "Source drain bottom junction capacitance grading coefficient"), IOPA( "pbsw", BSIM2_MOD_PBSW, IF_REAL, "Source drain side junction capacitance built in potential"), IOPA( "mjsw", BSIM2_MOD_MJSW, IF_REAL, "Source drain side junction capacitance grading coefficient"), IOPA( "cj", BSIM2_MOD_CJ, IF_REAL, "Source drain bottom junction capacitance per unit area"), IOPA( "cjsw", BSIM2_MOD_CJSW, IF_REAL, "Source drain side junction capacitance per unit area"), IOP( "wdf", BSIM2_MOD_DEFWIDTH, IF_REAL, "Default width of source drain diffusion in um"), IOP( "dell", BSIM2_MOD_DELLENGTH, IF_REAL, "Length reduction of source drain diffusion"), IOP("kf", BSIM2_MOD_KF, IF_REAL ,"Flicker noise coefficient"), IOP("af", BSIM2_MOD_AF, IF_REAL ,"Flicker noise exponent"), IP( "nmos", BSIM2_MOD_NMOS, IF_FLAG, "Flag to indicate NMOS"), IP( "pmos", BSIM2_MOD_PMOS, IF_FLAG, "Flag to indicate PMOS"), }; char *B2names[] = { "Drain", "Gate", "Source", "Bulk" }; int B2nSize = NUMELEMS(B2names); int B2pTSize = NUMELEMS(B2pTable); int B2mPTSize = NUMELEMS(B2mPTable); int B2iSize = sizeof(B2instance); int B2mSize = sizeof(B2model);