/********** Copyright 1990 Regents of the University of California. All rights reserved. Author: 1985 Thomas L. Quarles Modified by Paolo Nenzi 2003 and Dietmar Warning 2012 **********/ #include "ngspice/ngspice.h" #include "ngspice/devdefs.h" #include "diodefs.h" #include "ngspice/suffix.h" IFparm DIOpTable[] = { /* parameters */ IOPU("off", DIO_OFF, IF_FLAG, "Initially off"), IOPU("temp", DIO_TEMP, IF_REAL, "Instance temperature"), IOPU("dtemp", DIO_DTEMP, IF_REAL, "Instance delta temperature"), IOPAU("ic", DIO_IC, IF_REAL, "Initial device voltage"), IOPU("area", DIO_AREA, IF_REAL, "Area factor"), IOPU("pj", DIO_PJ, IF_REAL, "Perimeter factor"), IOPU("w", DIO_W, IF_REAL, "Diode width"), IOPU("l", DIO_L, IF_REAL, "Diode length"), IOPU("m", DIO_M, IF_REAL, "Multiplier"), IP("sens_area",DIO_AREA_SENS,IF_FLAG,"flag to request sensitivity WRT area"), OP("vd", DIO_VOLTAGE,IF_REAL, "Diode voltage"), OP("id", DIO_CURRENT,IF_REAL, "Diode current"), OPR("c", DIO_CURRENT,IF_REAL, "Diode current"), OP("gd", DIO_CONDUCT,IF_REAL, "Diode conductance"), OP("cd", DIO_CAP, IF_REAL, "Diode capacitance"), OPU("charge", DIO_CHARGE, IF_REAL, "Diode capacitor charge"), OPU("capcur", DIO_CAPCUR, IF_REAL, "Diode capacitor current"), OPU("p", DIO_POWER, IF_REAL, "Diode power"), OPU("sens_dc",DIO_QUEST_SENS_DC, IF_REAL, "dc sensitivity "), OPU("sens_real", DIO_QUEST_SENS_REAL,IF_REAL, "dc sens. and real part of ac sensitivity"), OPU("sens_imag", DIO_QUEST_SENS_IMAG,IF_REAL, "imag part of ac sensitivity "), OPU("sens_mag", DIO_QUEST_SENS_MAG, IF_REAL, "sensitivity of ac magnitude"), OPU("sens_ph", DIO_QUEST_SENS_PH, IF_REAL, "sensitivity of ac phase"), OPU("sens_cplx", DIO_QUEST_SENS_CPLX,IF_COMPLEX,"ac sensitivity") }; IFparm DIOmPTable[] = { /* model parameters */ IOP( "level", DIO_MOD_LEVEL, IF_INTEGER, "Diode level selector"), IOP( "is", DIO_MOD_IS, IF_REAL, "Saturation current"), IOPR( "js", DIO_MOD_IS, IF_REAL, "Saturation current"), IOP( "jsw", DIO_MOD_JSW, IF_REAL, "Sidewall Saturation current"), IOPU( "tnom",DIO_MOD_TNOM,IF_REAL, "Parameter measurement temperature"), IOPR( "tref",DIO_MOD_TNOM,IF_REAL, "Parameter measurement temperature"), IOP( "rs", DIO_MOD_RS, IF_REAL, "Ohmic resistance"), IOP( "trs", DIO_MOD_TRS, IF_REAL, "Ohmic resistance 1st order temp. coeff."), IOPR( "trs1", DIO_MOD_TRS, IF_REAL, "Ohmic resistance 1st order temp. coeff."), IOP( "trs2", DIO_MOD_TRS2, IF_REAL, "Ohmic resistance 2nd order temp. coeff."), IOP( "n", DIO_MOD_N, IF_REAL, "Emission Coefficient"), IOP( "ns", DIO_MOD_NS, IF_REAL, "Sidewall emission Coefficient"), IOPA( "tt", DIO_MOD_TT, IF_REAL, "Transit Time"), IOPA( "ttt1", DIO_MOD_TTT1, IF_REAL, "Transit Time 1st order temp. coeff."), IOPA( "ttt2", DIO_MOD_TTT2, IF_REAL, "Transit Time 2nd order temp. coeff."), IOPA( "cjo", DIO_MOD_CJO, IF_REAL, "Junction capacitance"), IOPR( "cj0", DIO_MOD_CJO, IF_REAL, "Junction capacitance"), IOPR( "cj", DIO_MOD_CJO, IF_REAL, "Junction capacitance"), IOP( "vj", DIO_MOD_VJ, IF_REAL, "Junction potential"), IOPR( "pb", DIO_MOD_VJ, IF_REAL, "Junction potential"), IOP( "m", DIO_MOD_M, IF_REAL, "Grading coefficient"), IOPR( "mj", DIO_MOD_M, IF_REAL, "Grading coefficient"), IOP( "tm1", DIO_MOD_TM1, IF_REAL, "Grading coefficient 1st temp. coeff."), IOP( "tm2", DIO_MOD_TM2, IF_REAL, "Grading coefficient 2nd temp. coeff."), IOP( "cjp", DIO_MOD_CJSW, IF_REAL, "Sidewall junction capacitance"), IOPR( "cjsw", DIO_MOD_CJSW, IF_REAL, "Sidewall junction capacitance"), IOP( "php", DIO_MOD_VJSW, IF_REAL, "Sidewall junction potential"), IOP( "mjsw", DIO_MOD_MJSW, IF_REAL, "Sidewall Grading coefficient"), IOP( "ikf", DIO_MOD_IKF, IF_REAL, "Forward Knee current"), IOPR( "ik", DIO_MOD_IKF, IF_REAL, "Forward Knee current"), IOP( "ikr", DIO_MOD_IKR, IF_REAL, "Reverse Knee current"), IOP( "nbv", DIO_MOD_NBV, IF_REAL, "Breakdown Emission Coefficient"), IOP("area", DIO_MOD_AREA, IF_REAL, "Area factor"), IOP( "pj", DIO_MOD_PJ, IF_REAL, "Perimeter factor"), IOP( "tlev", DIO_MOD_TLEV, IF_INTEGER, "Diode temperature equation selector"), IOP( "tlevc", DIO_MOD_TLEVC, IF_INTEGER, "Diode temperature equation selector"), IOP( "eg", DIO_MOD_EG, IF_REAL, "Activation energy"), IOP( "xti", DIO_MOD_XTI, IF_REAL, "Saturation current temperature exp."), IOP( "cta", DIO_MOD_CTA, IF_REAL, "Area junction temperature coefficient"), IOPR( "ctc", DIO_MOD_CTA, IF_REAL, "Area junction capacitance temperature coefficient"), IOP( "ctp", DIO_MOD_CTP, IF_REAL, "Perimeter junction capacitance temperature coefficient"), IOP( "ctp", DIO_MOD_CTP, IF_REAL, "Perimeter junction capacitance temperature coefficient"), IOP( "tpb", DIO_MOD_TPB, IF_REAL, "Area junction potential temperature coefficient"), IOPR( "tvj", DIO_MOD_TPB, IF_REAL, "Area junction potential temperature coefficient"), IOP( "tphp", DIO_MOD_TPHP, IF_REAL, "Perimeter junction potential temperature coefficient"), IOP( "jtun", DIO_MOD_JTUN, IF_REAL, "Tunneling saturation current"), IOP( "jtunsw", DIO_MOD_JTUNSW, IF_REAL, "Tunneling sidewall saturation current"), IOP( "ntun", DIO_MOD_NTUN, IF_REAL, "Tunneling emission coefficient"), IOP( "xtitun", DIO_MOD_XTITUN, IF_REAL, "Tunneling saturation current exponential"), IOP( "keg", DIO_MOD_KEG, IF_REAL, "EG correction factor for tunneling"), IOP( "kf", DIO_MOD_KF, IF_REAL, "flicker noise coefficient"), IOP( "af", DIO_MOD_AF, IF_REAL, "flicker noise exponent"), IOP( "fc", DIO_MOD_FC, IF_REAL, "Forward bias junction fit parameter"), IOP( "fcs", DIO_MOD_FCS, IF_REAL, "Forward bias sidewall junction fit parameter"), IOP( "bv", DIO_MOD_BV, IF_REAL, "Reverse breakdown voltage"), IOP( "ibv", DIO_MOD_IBV, IF_REAL, "Current at reverse breakdown voltage"), IOPR( "ib", DIO_MOD_IBV, IF_REAL, "Current at reverse breakdown voltage"), IOP( "tcv", DIO_MOD_TCV, IF_REAL, "Reverse breakdown voltage temperature coefficient"), OPU( "cond", DIO_MOD_COND,IF_REAL, "Ohmic conductance"), IOP( "fv_max", DIO_MOD_FV_MAX, IF_REAL, "maximum voltage in forward direction"), IOP( "bv_max", DIO_MOD_BV_MAX, IF_REAL, "maximum voltage in reverse direction"), IP( "d", DIO_MOD_D, IF_FLAG, "Diode model") }; char *DIOnames[] = { "D+", "D-" }; int DIOnSize = NUMELEMS(DIOnames); int DIOpTSize = NUMELEMS(DIOpTable); int DIOmPTSize = NUMELEMS(DIOmPTable); int DIOiSize = sizeof(DIOinstance); int DIOmSize = sizeof(DIOmodel);