/********** Copyright 1990 Regents of the University of California. All rights reserved. Author: 1985 Thomas L. Quarles Model Author: 1995 Colin McAndrew Motorola Spice3 Implementation: 2003 Dietmar Warning DAnalyse GmbH **********/ /* * This file defines the VBIC data structures that are * available to the next level(s) up the calling hierarchy */ #include "ngspice/ngspice.h" #include "ngspice/devdefs.h" #include "vbicdefs.h" #include "ngspice/suffix.h" IFparm VBICpTable[] = { /* parameters */ IOPU("area", VBIC_AREA, IF_REAL, "Area factor"), IOPU("off", VBIC_OFF, IF_FLAG, "Device initially off"), IP("ic", VBIC_IC, IF_REALVEC, "Initial condition vector"), IOPAU("icvbe", VBIC_IC_VBE, IF_REAL, "Initial B-E voltage"), IOPAU("icvce", VBIC_IC_VCE, IF_REAL, "Initial C-E voltage"), IOPU("temp", VBIC_TEMP, IF_REAL, "Instance temperature"), IOPU("dtemp", VBIC_DTEMP, IF_REAL, "Instance delta temperature"), IOPU("m", VBIC_M, IF_REAL, "Multiplier"), OPU("collnode", VBIC_QUEST_COLLNODE, IF_INTEGER, "Number of collector node"), OPU("basenode", VBIC_QUEST_BASENODE, IF_INTEGER, "Number of base node"), OPU("emitnode", VBIC_QUEST_EMITNODE, IF_INTEGER, "Number of emitter node"), OPU("subsnode", VBIC_QUEST_SUBSNODE, IF_INTEGER, "Number of substrate node"), OPU("collCXnode",VBIC_QUEST_COLLCXNODE,IF_INTEGER, "Internal collector node"), OPU("collCInode",VBIC_QUEST_COLLCINODE,IF_INTEGER, "Internal collector node"), OPU("baseBXnode",VBIC_QUEST_BASEBXNODE,IF_INTEGER, "Internal base node"), OPU("baseBInode",VBIC_QUEST_BASEBINODE,IF_INTEGER, "Internal base node"), OPU("baseBPnode",VBIC_QUEST_BASEBPNODE,IF_INTEGER, "Internal base node"), OPU("emitEInode",VBIC_QUEST_EMITEINODE,IF_INTEGER, "Internal emitter node"), OPU("subsSInode",VBIC_QUEST_SUBSSINODE,IF_INTEGER, "Internal substrate node"), OP("vbe", VBIC_QUEST_VBE, IF_REAL, "B-E voltage"), OP("vbc", VBIC_QUEST_VBC, IF_REAL, "B-C voltage"), OP("ic", VBIC_QUEST_CC, IF_REAL, "Collector current"), OP("ib", VBIC_QUEST_CB, IF_REAL, "Base current"), OP("ie", VBIC_QUEST_CE, IF_REAL, "Emitter current"), OP("is", VBIC_QUEST_CS, IF_REAL, "Substrate current"), OP("gm", VBIC_QUEST_GM, IF_REAL, "Small signal transconductance dIc/dVbe"), OP("go", VBIC_QUEST_GO, IF_REAL, "Small signal output conductance dIc/dVbc"), OP("gpi", VBIC_QUEST_GPI, IF_REAL, "Small signal input conductance dIb/dVbe"), OP("gmu", VBIC_QUEST_GMU, IF_REAL, "Small signal conductance dIb/dVbc"), OP("gx", VBIC_QUEST_GX, IF_REAL, "Conductance from base to internal base"), OP("cbe", VBIC_QUEST_CBE, IF_REAL, "Internal base to emitter capacitance"), OP("cbex", VBIC_QUEST_CBEX, IF_REAL, "External base to emitter capacitance"), OP("cbc", VBIC_QUEST_CBC, IF_REAL, "Internal base to collector capacitance"), OP("cbcx", VBIC_QUEST_CBCX, IF_REAL, "External Base to collector capacitance"), OP("cbep", VBIC_QUEST_CBEP, IF_REAL, "Parasitic Base to emitter capacitance"), OP("cbcp", VBIC_QUEST_CBCP, IF_REAL, "Parasitic Base to collector capacitance"), OP("p", VBIC_QUEST_POWER,IF_REAL, "Power dissipation"), OPU("geqcb",VBIC_QUEST_GEQCB,IF_REAL, "Internal C-B-base cap. equiv. cond."), OPU("geqbx",VBIC_QUEST_GEQBX,IF_REAL, "External C-B-base cap. equiv. cond."), OPU("qbe", VBIC_QUEST_QBE, IF_REAL, "Charge storage B-E junction"), OPU("cqbe", VBIC_QUEST_CQBE, IF_REAL, "Cap. due to charge storage in B-E jct."), OPU("qbc", VBIC_QUEST_QBC, IF_REAL, "Charge storage B-C junction"), OPU("cqbc", VBIC_QUEST_CQBC, IF_REAL, "Cap. due to charge storage in B-C jct."), OPU("qbx", VBIC_QUEST_QBX, IF_REAL, "Charge storage B-X junction"), OPU("cqbx", VBIC_QUEST_CQBX, IF_REAL, "Cap. due to charge storage in B-X jct."), OPU("sens_dc", VBIC_QUEST_SENS_DC, IF_REAL, "DC sensitivity "), OPU("sens_real",VBIC_QUEST_SENS_REAL, IF_REAL, "Real part of AC sensitivity"), OPU("sens_imag",VBIC_QUEST_SENS_IMAG,IF_REAL, "DC sens. & imag part of AC sens."), OPU("sens_mag", VBIC_QUEST_SENS_MAG, IF_REAL, "Sensitivity of AC magnitude"), OPU("sens_ph", VBIC_QUEST_SENS_PH, IF_REAL, "Sensitivity of AC phase"), OPU("sens_cplx",VBIC_QUEST_SENS_CPLX, IF_COMPLEX, "AC sensitivity") }; IFparm VBICmPTable[] = { /* model parameters */ OP("type", VBIC_MOD_TYPE, IF_STRING, "NPN or PNP"), IOPU("npn", VBIC_MOD_NPN, IF_FLAG, "NPN type device"), IOPU("pnp", VBIC_MOD_PNP, IF_FLAG, "PNP type device"), IOP("tnom", VBIC_MOD_TNOM, IF_REAL, "Parameter measurement temperature"), IOP("rcx", VBIC_MOD_RCX, IF_REAL, "Extrinsic coll resistance"), IOP("rci", VBIC_MOD_RCI, IF_REAL, "Intrinsic coll resistance"), IOP("vo", VBIC_MOD_VO, IF_REAL, "Epi drift saturation voltage"), IOP("gamm", VBIC_MOD_GAMM, IF_REAL, "Epi doping parameter"), IOP("hrcf", VBIC_MOD_HRCF, IF_REAL, "High current RC factor"), IOP("rbx", VBIC_MOD_RBX, IF_REAL, "Extrinsic base resistance"), IOP("rbi", VBIC_MOD_RBI, IF_REAL, "Intrinsic base resistance"), IOP("re", VBIC_MOD_RE, IF_REAL, "Intrinsic emitter resistance"), IOP("rs", VBIC_MOD_RS, IF_REAL, "Intrinsic substrate resistance"), IOP("rbp", VBIC_MOD_RBP, IF_REAL, "Parasitic base resistance"), IOP("is", VBIC_MOD_IS, IF_REAL, "Transport saturation current"), IOP("nf", VBIC_MOD_NF, IF_REAL, "Forward emission coefficient"), IOP("nr", VBIC_MOD_NR, IF_REAL, "Reverse emission coefficient"), IOP("fc", VBIC_MOD_FC, IF_REAL, "Fwd bias depletion capacitance limit"), IOP("cbeo", VBIC_MOD_CBEO, IF_REAL, "Extrinsic B-E overlap capacitance"), IOP("cje", VBIC_MOD_CJE, IF_REAL, "Zero bias B-E depletion capacitance"), IOP("pe", VBIC_MOD_PE, IF_REAL, "B-E built in potential"), IOP("me", VBIC_MOD_ME, IF_REAL, "B-E junction grading coefficient"), IOP("aje", VBIC_MOD_AJE, IF_REAL, "B-E capacitance smoothing factor"), IOP("cbco", VBIC_MOD_CBCO, IF_REAL, "Extrinsic B-C overlap capacitance"), IOP("cjc", VBIC_MOD_CJC, IF_REAL, "Zero bias B-C depletion capacitance"), IOP("qco", VBIC_MOD_QCO, IF_REAL, "Epi charge parameter"), IOP("cjep", VBIC_MOD_CJEP, IF_REAL, "B-C extrinsic zero bias capacitance"), IOP("pc", VBIC_MOD_PC, IF_REAL, "B-C built in potential"), IOP("mc", VBIC_MOD_MC, IF_REAL, "B-C junction grading coefficient"), IOP("ajc", VBIC_MOD_AJC, IF_REAL, "B-C capacitance smoothing factor"), IOP("cjcp", VBIC_MOD_CJCP, IF_REAL, "Zero bias S-C capacitance"), IOP("ps", VBIC_MOD_PS, IF_REAL, "S-C junction built in potential"), IOP("ms", VBIC_MOD_MS, IF_REAL, "S-C junction grading coefficient"), IOP("ajs", VBIC_MOD_AJS, IF_REAL, "S-C capacitance smoothing factor"), IOP("ibei", VBIC_MOD_IBEI, IF_REAL, "Ideal B-E saturation current"), IOP("wbe", VBIC_MOD_WBE, IF_REAL, "Portion of IBEI from Vbei, 1-WBE from Vbex"), IOP("nei", VBIC_MOD_NEI, IF_REAL, "Ideal B-E emission coefficient"), IOP("iben", VBIC_MOD_IBEN, IF_REAL, "Non-ideal B-E saturation current"), IOP("nen", VBIC_MOD_NEN, IF_REAL, "Non-ideal B-E emission coefficient"), IOP("ibci", VBIC_MOD_IBCI, IF_REAL, "Ideal B-C saturation current"), IOP("nci", VBIC_MOD_NCI, IF_REAL, "Ideal B-C emission coefficient"), IOP("ibcn", VBIC_MOD_IBCN, IF_REAL, "Non-ideal B-C saturation current"), IOP("ncn", VBIC_MOD_NCN, IF_REAL, "Non-ideal B-C emission coefficient"), IOP("avc1", VBIC_MOD_AVC1, IF_REAL, "B-C weak avalanche parameter 1"), IOP("avc2", VBIC_MOD_AVC2, IF_REAL, "B-C weak avalanche parameter 2"), IOP("isp", VBIC_MOD_ISP, IF_REAL, "Parasitic transport saturation current"), IOP("wsp", VBIC_MOD_WSP, IF_REAL, "Portion of ICCP"), IOP("nfp", VBIC_MOD_NFP, IF_REAL, "Parasitic fwd emission coefficient"), IOP("ibeip", VBIC_MOD_IBEIP, IF_REAL, "Ideal parasitic B-E saturation current"), IOP("ibenp", VBIC_MOD_IBENP, IF_REAL, "Non-ideal parasitic B-E saturation current"), IOP("ibcip", VBIC_MOD_IBCIP, IF_REAL, "Ideal parasitic B-C saturation current"), IOP("ncip", VBIC_MOD_NCIP, IF_REAL, "Ideal parasitic B-C emission coefficient"), IOP("ibcnp", VBIC_MOD_IBCNP, IF_REAL, "Nonideal parasitic B-C saturation current"), IOP("ncnp", VBIC_MOD_NCNP, IF_REAL, "Nonideal parasitic B-C emission coefficient"), IOP("vef", VBIC_MOD_VEF, IF_REAL, "Forward Early voltage"), IOP("ver", VBIC_MOD_VER, IF_REAL, "Reverse Early voltage"), IOP("ikf", VBIC_MOD_IKF, IF_REAL, "Forward knee current"), IOP("ikr", VBIC_MOD_IKR, IF_REAL, "Reverse knee current"), IOP("ikp", VBIC_MOD_IKP, IF_REAL, "Parasitic knee current"), IOP("tf", VBIC_MOD_TF, IF_REAL, "Ideal forward transit time"), IOP("qtf", VBIC_MOD_QTF, IF_REAL, "Variation of TF with base-width modulation"), IOP("xtf", VBIC_MOD_XTF, IF_REAL, "Coefficient for bias dependence of TF"), IOP("vtf", VBIC_MOD_VTF, IF_REAL, "Voltage giving VBC dependence of TF"), IOP("itf", VBIC_MOD_ITF, IF_REAL, "High current dependence of TF"), IOP("tr", VBIC_MOD_TR, IF_REAL, "Ideal reverse transit time"), IOP("td", VBIC_MOD_TD, IF_REAL, "Forward excess-phase delay time"), IOP("kfn", VBIC_MOD_KFN, IF_REAL, "B-E Flicker Noise Coefficient"), IOP("afn", VBIC_MOD_AFN, IF_REAL, "B-E Flicker Noise Exponent"), IOP("bfn", VBIC_MOD_BFN, IF_REAL, "B-E Flicker Noise 1/f dependence"), IOP("xre", VBIC_MOD_XRE, IF_REAL, "Temperature exponent of RE"), IOP("xrb", VBIC_MOD_XRB, IF_REAL, "Temperature exponent of RB"), IOP("xrbi", VBIC_MOD_XRBI, IF_REAL, "Temperature exponent of RBI"), IOP("xrc", VBIC_MOD_XRC, IF_REAL, "Temperature exponent of RC"), IOP("xrci", VBIC_MOD_XRCI, IF_REAL, "Temperature exponent of RCI"), IOP("xrs", VBIC_MOD_XRS, IF_REAL, "Temperature exponent of RS"), IOP("xvo", VBIC_MOD_XVO, IF_REAL, "Temperature exponent of VO"), IOP("ea", VBIC_MOD_EA, IF_REAL, "Activation energy for IS"), IOP("eaie", VBIC_MOD_EAIE, IF_REAL, "Activation energy for IBEI"), IOP("eaic", VBIC_MOD_EAIC, IF_REAL, "Activation energy for IBCI/IBEIP"), IOP("eais", VBIC_MOD_EAIS, IF_REAL, "Activation energy for IBCIP"), IOP("eane", VBIC_MOD_EANE, IF_REAL, "Activation energy for IBEN"), IOP("eanc", VBIC_MOD_EANC, IF_REAL, "Activation energy for IBCN/IBENP"), IOP("eans", VBIC_MOD_EANS, IF_REAL, "Activation energy for IBCNP"), IOP("xis", VBIC_MOD_XIS, IF_REAL, "Temperature exponent of IS"), IOP("xii", VBIC_MOD_XII, IF_REAL, "Temperature exponent of IBEI,IBCI,IBEIP,IBCIP"), IOP("xin", VBIC_MOD_XIN, IF_REAL, "Temperature exponent of IBEN,IBCN,IBENP,IBCNP"), IOP("tnf", VBIC_MOD_TNF, IF_REAL, "Temperature exponent of NF"), IOP("tavc", VBIC_MOD_TAVC, IF_REAL, "Temperature exponent of AVC2"), IOP("rth", VBIC_MOD_RTH, IF_REAL, "Thermal resistance"), IOP("cth", VBIC_MOD_CTH, IF_REAL, "Thermal capacitance"), IOP("vrt", VBIC_MOD_VRT, IF_REAL, "Punch-through voltage of internal B-C junction"), IOP("art", VBIC_MOD_ART, IF_REAL, "Smoothing parameter for reach-through"), IOP("ccso", VBIC_MOD_CCSO, IF_REAL, "Fixed C-S capacitance"), IOP("qbm", VBIC_MOD_QBM, IF_REAL, "Select SGP qb formulation"), IOP("nkf", VBIC_MOD_NKF, IF_REAL, "High current beta rolloff"), IOP("xikf", VBIC_MOD_XIKF, IF_REAL, "Temperature exponent of IKF"), IOP("xrcx", VBIC_MOD_XRCX, IF_REAL, "Temperature exponent of RCX"), IOP("xrbx", VBIC_MOD_XRBX, IF_REAL, "Temperature exponent of RBX"), IOP("xrbp", VBIC_MOD_XRBP, IF_REAL, "Temperature exponent of RBP"), IOP("isrr", VBIC_MOD_ISRR, IF_REAL, "Separate IS for fwd and rev"), IOP("xisr", VBIC_MOD_XISR, IF_REAL, "Temperature exponent of ISR"), IOP("dear", VBIC_MOD_DEAR, IF_REAL, "Delta activation energy for ISRR"), IOP("eap", VBIC_MOD_EAP, IF_REAL, "Exitivation energy for ISP"), IOP("vbbe", VBIC_MOD_VBBE, IF_REAL, "B-E breakdown voltage"), IOP("nbbe", VBIC_MOD_NBBE, IF_REAL, "B-E breakdown emission coefficient"), IOP("ibbe", VBIC_MOD_IBBE, IF_REAL, "B-E breakdown current"), IOP("tvbbe1",VBIC_MOD_TVBBE1,IF_REAL, "Linear temperature coefficient of VBBE"), IOP("tvbbe2",VBIC_MOD_TVBBE2,IF_REAL, "Quadratic temperature coefficient of VBBE"), IOP("tnbbe", VBIC_MOD_TNBBE, IF_REAL, "Temperature coefficient of NBBE"), IOP("ebbe", VBIC_MOD_EBBE, IF_REAL, "exp(-VBBE/(NBBE*Vtv))"), IOP("dtemp", VBIC_MOD_DTEMP, IF_REAL, "Locale Temperature difference"), IOP("vers", VBIC_MOD_VERS, IF_REAL, "Revision Version"), IOP("vref", VBIC_MOD_VREF, IF_REAL, "Reference Version"), IOP("vbe_max", VBIC_MOD_VBE_MAX, IF_REAL, "maximum voltage B-E junction"), IOP("vbc_max", VBIC_MOD_VBC_MAX, IF_REAL, "maximum voltage B-C junction"), IOP("vce_max", VBIC_MOD_VCE_MAX, IF_REAL, "maximum voltage C-E branch") }; char *VBICnames[] = { "collector", "base", "emitter", "substrate" }; int VBICnSize = NUMELEMS(VBICnames); int VBICpTSize = NUMELEMS(VBICpTable); int VBICmPTSize = NUMELEMS(VBICmPTable); int VBICiSize = sizeof(VBICinstance); int VBICmSize = sizeof(VBICmodel);